Skip to main content Skip to search Skip to main navigation

Synergy 21 LED Flex Strip 3528 - 80 blau DC24V 24W LP IP68

Synergy 21 LED Flex Strip  80 Serie

Spannung: 24V, 
Watt: 4,8W/m 24W gesamt
Lichtfarbe: blau , 
Helligkeit: 130Lm/W, gesamt: 3120LM

Abstrahlwinkel: 120°
Schutzklasse: IP68
LED Anzahl: 80LEDs/m, Gesamt: 400LEDs
LED Type: 2835
Schnittmaß:100mm
Maße LED Strip: 5000*12,5*4,5 mm

Arbeitstemperatur: -25°C bis +40°C
Klebeband: ja 3M rückseitig


Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 40°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann.
Auf überhitzte LED Strips kann keine Garantie gewährt werden.

Article properties

Abstrahlwinkel: 120 Grad
Ampere (CC): 1 A
CRI: >90 CRI
Dimmbar: Ja, abhängig vom Netzteil
Konstantstrom oder Konstantvolt: CV
LED Strip Breite: 12,5 mm
LED Strip Chip Anzahl: 80
LED Strip Chip Merkmal: LP
LED Strip Chip Typ: 2835
LED Strip Höhe: 4,5 mm
LED Strip Klebeband: ja
LED Strip Länge: 5000 mm
LED Strip kürzbar: 100 mm
Lichtfarbe Name: Blau
Lumen: 3120 LM
Produktname: Serie 3528 - 80 LP IP68
Schutzklasse: IP68
Volt: 24 Volt
Watt: 24 W

Information on Energy efficiency

Energy efficiency class G
KWh/1000h: 24
Lumen: 3120
Watt: 24
Lifetime: 35000 h
Switch cycles: 50000
Optimal operating temperature: 25 °C
EEK Label: Download

GPSR

Handelsname
ALLNET GmbH
Handelsmarke
Synergy 21
Postanschrift
Maistr. 2, 82110 Germering
E-Mail
gpsr@allnet.de
Mögliche Risiken
WARNUNG: Elektrische Risiken bei unsachgemäßer Installation. Brandgefahr durch Ueberhitzung, Kurzschlussgefahr bei Feuchtigkeit. Nicht in feuchten/staubigen Umgebungen ohne IP-Schutz verwenden. Blendgefahr bei direkter Sicht.
Sichere Installation und ausreichende Kuehlung gewaehrleisten. Beschaedigte Kabel sofort austauschen. Keine unsachgemaesse Kuerzung/Verlaengerung. Nur DC24V Netzteil verwenden. Ausser Reichweite von Kindern aufbewahren.
Entsorgung gemaess WEEE-Richtlinie – nicht im Hausmuell entsorgen. Defekte Streifen sofort austauschen. Vor Reinigung Strom trennen. Betrieb nur in trockener Umgebung. Ausser Reichweite von Kindern aufbewahren.

WEEE

WEEE Marke
Synergy 21
WEEE Reg. Nr.
DE13101093
Geräteart
3 - Lampen
B2C Gerät
Synergy 21 - Waterproof connector 1:1
Synergy 21 - Waterproof connector 1:1

250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter

Product number: 148726
MPN: S21-COMP-00751
€9.64*
In Stock: 11x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector 1:2
Synergy 21 - Waterproof connector 1:2

Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0

Product number: 148727
MPN: S21-COMP-00752
€9.89*
In Stock: 70x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector box 4 ports
Synergy 21 - Waterproof connector box 4 ports

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS

Product number: 148728
MPN: S21-COMP-00753
€7.68*
In Stock: 61x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector box 3 ports transparent
Synergy 21 - Waterproof connector box 3 ports transparent

Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm

Product number: 148729
MPN: S21-COMP-00754
€12.66*
In Stock: 74x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector box 3 ports
Synergy 21 - Waterproof connector box 3 ports

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm

Product number: 148730
MPN: S21-COMP-00755
€8.19*
In Stock: 100+

Available, delivery time: 1-2 Tage

Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 2fach Klemme
Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 2fach Klemme

IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

Product number: 247722
MPN: S21-COMP-2500138
€2.28*
In Stock: 31x

Available, delivery time: 1-2 Tage

Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 3fach Klemme
Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 3fach Klemme

IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

Product number: 247724
MPN: S21-COMP-2500140
€2.48*
In Stock: 95x

Available, delivery time: 1-2 Tage

Synergy 21 indoor Kabelverbinder 3in - 6out
Synergy 21 indoor Kabelverbinder 3in - 6out

5 pack of quick connectors 3 inputs and 3 outputs for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C

Product number: 250038
MPN: S21-COMP-250224
€2.59*
In Stock: 56x

Available, delivery time: 1-2 Tage

Synergy 21 indoor Kabelverbinder 2in - 4out
Synergy 21 indoor Kabelverbinder 2in - 4out

5 pack of quick connectors  2 inlets and 4 outlets for electrical cables  Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C

Product number: 250039
MPN: S21-COMP-250225
€4.86*
In Stock: 87x

Available, delivery time: 1-2 Tage

Synergy 21 Solder Heat Shrink Connector Set – Waterproof IP67
Synergy 21 Solder Heat Shrink Connector Set – Waterproof IP67

Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details   Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.

Product number: 250190
MPN: S21-COMP-250244
€11.88*
In Stock: 61x

Available, delivery time: 1-2 Tage

Skip product gallery

Accessories

Synergy 21 - Waterproof connector 1:1
Synergy 21 - Waterproof connector 1:1

250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter

Product number: 148726
MPN: S21-COMP-00751
€9.64*
In Stock: 11x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector 1:2
Synergy 21 - Waterproof connector 1:2

Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0

Product number: 148727
MPN: S21-COMP-00752
€9.89*
In Stock: 70x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector box 4 ports
Synergy 21 - Waterproof connector box 4 ports

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS

Product number: 148728
MPN: S21-COMP-00753
€7.68*
In Stock: 61x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector box 3 ports transparent
Synergy 21 - Waterproof connector box 3 ports transparent

Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm

Product number: 148729
MPN: S21-COMP-00754
€12.66*
In Stock: 74x

Available, delivery time: 1-2 Tage

Synergy 21 - Waterproof connector box 3 ports
Synergy 21 - Waterproof connector box 3 ports

Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm

Product number: 148730
MPN: S21-COMP-00755
€8.19*
In Stock: 100+

Available, delivery time: 1-2 Tage

Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 2fach Klemme
Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 2fach Klemme

IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

Product number: 247722
MPN: S21-COMP-2500138
€2.28*
In Stock: 31x

Available, delivery time: 1-2 Tage

Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 3fach Klemme
Synergy 21 Outdoor Kabelverbinder IP68 1:1 mit 3fach Klemme

IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A  IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm

Product number: 247724
MPN: S21-COMP-2500140
€2.48*
In Stock: 95x

Available, delivery time: 1-2 Tage

Synergy 21 indoor Kabelverbinder 3in - 6out
Synergy 21 indoor Kabelverbinder 3in - 6out

5 pack of quick connectors 3 inputs and 3 outputs for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C

Product number: 250038
MPN: S21-COMP-250224
€2.59*
In Stock: 56x

Available, delivery time: 1-2 Tage

Synergy 21 indoor Kabelverbinder 2in - 4out
Synergy 21 indoor Kabelverbinder 2in - 4out

5 pack of quick connectors  2 inlets and 4 outlets for electrical cables  Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C

Product number: 250039
MPN: S21-COMP-250225
€4.86*
In Stock: 87x

Available, delivery time: 1-2 Tage

Synergy 21 Solder Heat Shrink Connector Set – Waterproof IP67
Synergy 21 Solder Heat Shrink Connector Set – Waterproof IP67

Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details   Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.

Product number: 250190
MPN: S21-COMP-250244
€11.88*
In Stock: 61x

Available, delivery time: 1-2 Tage