LED Strip 24V einfarbig – COB & SMD, 2200K bis 6500K
Synergy 21 LED Flex Strip Series COB high power A copper strip is embedded on the reverse side to improve stability and heat dissipation. Voltage: 24V, Wattage: 15W/m, 75W total Light colour: warm white, 3000K, CRI>90 Luminous efficacy: 891 lm/W or 1317 lm/m, total: 6685 lm Beam angle: 120° Protection class: IP20 Number of LEDs: 480 LEDs/m, total: 2,400 LEDs LED type: COB Cut-to-size: 50 mm LED strip dimensions: 5000 × 10 × 2.5 mm Operating temperature: -25°C to +40°C Adhesive tape: yes, 3M on the reverse side Please ensure that the LED strip does not exceed the operating temperature of 40°C, as otherwise its service life cannot be guaranteed. No warranty can be provided for overheated LED strips.
Synergy 21 LED Flex Strip series COB high power For better stability and heat dissipation, a copper strip is embedded on the back. Voltage: 24V, Watt: 15W/m 75W total Light colour: RGBW + 3000K, CRI>90 Brightness: 44Lm/W or 660Lm/M total: 3300LM Beam angle: 120° Protection class: IP20 LED number: 1344LEDs/m, total: 6720LEDs LED type: COB Cutting dimension: 83.3mm LED strip dimensions: 5000*12*2.5mm Working temperature: -25°C to +40°C Adhesive tape: yes 3M on the back Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED Strips.
Synergy 21 LED Flex Strip Series COB high power A copper strip is embedded on the reverse side to improve stability and heat dissipation. Specially designed for sauna and wellness areas Voltage: 24V, Wattage: 8W/m, 40W total Light colour: super warm white, 2700K, CRI>90 Luminous efficacy: 78 lm/W or 624 lm/m, total: 3120 lm Beam angle: 120° Protection class: IP67 Number of LEDs: 480 LEDs/m, total: 2400 LEDs LED type: COB Cutting length: 50 mm LED strip dimensions: 5000 × 12 × 6 mm Width/height of connector: 14 × 8 mm Operating temperature: -25°C to +125°C Adhesive tape: yes, 3M on the back
Synergy 21 LED Flex Strip 126 Serie Speziell für Sauna/Welness Bereich Spannung: 24V, Watt: 9,6W/m 48W gesamt Lichtfarbe: warmweiss , 3000K, CRI>90 Helligkeit: 115Lm/W, 1104Lm/m 5520LM gesamt: Abstrahlwinkel: 120° Schutzklasse: IP67+ (wet) LED Anzahl: 126LEDs/m, Gesamt: 630LEDs LED Type: 2835 Schnittmaß:55,6mm Maße LED Strip: 5000*10*4 mm Arbeitstemperatur: -25°C bis +100°C Klebeband: ja 3M rückseitig Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 100°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.
Synergy 21 LED Flex Strip UL series ULS=Ultra Long Series Voltage: 24V, Watt: 100W, 10W/m Light colour: RGB+CCT , RGB+2400K+6000K Brightness: 2400K=155lm/m, 6000K= 200lm/m RGB+CCT= 570lm/m Brightness: red= 57lm/m, green= 127lm/m, blue= 31lm/m Beam angle: 120° Protection class: IP20 Number of LEDs: 60*5050SMD 5in1 LEDs per metre Dimensions: 10000*12*2.1 mm PCB colour: white, open cable end (360±5mm) Operating temperature: -20°C to +50°C Coolable every 6 LEDs (100mm) Adhesive tape: yes 3M on the back Strip can be cut at the cut marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split the strip when there is no power. Our 3M adhesive tape adheres well, but is still only to be regarded as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the operating temperature of 50°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED strips
Synergy 21 LED Flex Strip UL Series ULS=Ultra Long Series Voltage: 24V, Watt: 200W, 20W/m Light colour: RGB+CCT , RGB+2400K+6000K Brightness: 2400K=370lm/m, RGB+CCT= 1265lm/m Beam angle: 120° Protection class: IP20 Number of LEDs: 60*5050SMD 5in1 LEDs per metre Dimensions: 10000*15*3 mm PCB colour: white, open cable end (360±5mm) Working temperature: -25°C to +40°C Can be shortened every 6 LEDs Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 220 Strip can be shortened at the cut marks with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when no current is present. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips
RGB-WW Flex-Stripe, 5 metres, RGB and warm white on one chip RGB and dual white 2700-6500K DC 24V, 165W, 33W/m, 13.2W/m for white and 19.8W/m for RGB Brightness: 2100lm per metre 420 PCS 5050 SMD LED Beam angle: 120° Common positive pole Protection class: IP20 L*W*H: 5000*12*2.5 Shortenable: all 6 LEDs can be shortened (70mm) 3M adhesive tape for mounting aid on the back Control e.g. via Synergy 21 Controller S21-3653 (135731) Please note that LED strips must also be cooled. Ensure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.
RGB-WW Flex-Stripe, 5 metres, RGB and warm white on one chip RGB and dual white 2700-6500K DC 24V, 120W, 24W/m, 9.6W/m for white and 14.6W/m for RGB Brightness: 1500lm ± 10% per metre 300 PCS 5050 SMD LED Beam angle: 120° common positive pole Protection class: IP65(empty tube) L*W*H: 5000*14.5*4 Can be shortened: all 6 LEDs can be shortened (10 cm) 3M adhesive tape for mounting aid on the back Control e.g. via Synergy 21 Controller S21-3653 (135731) Please note that LED strips must also be cooled. Ensure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.
RGB-WW Flex-Stripe, 5 metres, RGB and warm white on one chip RGB and dual white 2700-6500K DC 24V, 120W, 24W/m, 9.6W/m for white and 14.6W/m for RGB Brightness: 1500lm ± 10% per metre 300 PCS 5050 SMD LED Beam angle: 120° Common positive pole Protection class: IP20 L*W*H: 5000*12*2.5 Can be shortened: all 6 LEDs can be shortened (10 cm) 3M adhesive tape for mounting aid on the back Control e.g. via Synergy 21 Controller S21-3653 (135731) Please note that LED strips must also be cooled. Ensure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guarant
Synergy 21 LED Flex Strip RGB DC24V 72W IP20 Voltage: 24V, max.3A Watt: 72W±10% Light colour: RGB, common positive pole Beam angle: 120° Protection class: IP20 Number of LEDs: 300*5050SMD Dimensions: 5000*10*2.2 mm PCB colour: white, open cable end Operating temperature: -25°C to +40°C Weight: 0.090 kg Can be shortened every 6 LEDs, LED spacing: 16.7 mm Adhesive tape: yes 3M on the back Energy efficiency class: A kWh/1000h: 72 Strip can be shortened at the markings with sharp scissors. !Attention! Strip must first be checked for functionality. Only split the strip when there is no current. Our 3M adhesive tape adheres well, but should only be used as a mounting aid. There are a variety of mounting options, such as clips, permanently elastic mounting adhesive, cable ties, etc. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed a working temperature of 40°C, otherwise its service life cannot be guaranteed. No guarantee can be given for overheated LED strips
LED Flex Strip RGB, common positive pole DC24V, max. 3A, 72W, 300Leds, 120°, 5050SMD Lumen: 2400 Length: 5000*12*5mm, can be shortened: all 6 LEDs can be shortened (10 cm) white PCB outdoor, filled tube, IP68 Suitable up to -25°C! Adhesive tape for mounting aid on the back Energy efficiency class: A kWh/1000h: 72 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed an operating temperature of 45°C, otherwise the service life cannot be guaranteed.
LED Flex Strip super warm white, Kelvin: 2500K ±250 DC24V, max 4A, max power 72W, 14,4W/m 600Leds, 5000lm, 120°, 3528SMD can be shortened every 6 LEDs (5cm) Length: 5000*10*2.5mm, Adhesive tape for mounting aid on the back open cable end indoor Energy efficiency class: A kWh/1000h: 96 Please note that LED strips also need to be cooled. Make sure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.
LED Flex Strip cold white, DC24V, max. 2A, 48W, 600Leds, 120°, 3528SMD Length: 5000*10.8*4mm, (strip width 10.8mm, end cap width 12mm) Lumen: 975Lm/M, total: 4875 Kelvin: 600K CRI: >95 Protection class: IP68, outdoor incl 3M tape Suitable down to -25°C! Strip can be cut at marking marks with sharp scissors. !Attention! Strip must be checked for functionality beforehand. Only split strip when no current is present. Please note that LED strips must also be cooled. Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed.
Synergy 21 LED Flex Strip Series COB high power A copper strip is embedded on the reverse side to improve stability and heat dissipation. Specially designed for sauna and wellness areas Voltage: 24V, Wattage: 10W/m, 50W total Light colour: Warm white, 3000K, CRI>90+ Luminous efficacy: 35 lm/W or 350 lm/m, total: 1750 lm Beam angle: 120° Protection class: IP67 LED type: COB Cutting dimension: 83.3 mm LED strip dimensions: 5000 × 14.5 × 6 mm Width/height of connector: 18 × 10 mm Operating temperature: -25°C to +105°C (221°F) Adhesive tape: yes, 3M on the back Please ensure that the LED strip does not exceed an operating temperature of 40°C, as otherwise its service life cannot be guaranteed. No warranty can be provided for overheated LED strips.
Synergy 21 LED Flex Strip Series COB high power A copper strip is embedded on the reverse side to improve stability and heat dissipation. Specially designed for sauna and wellness areas Voltage: 24V, Wattage: 10W/m, 50W total Light colour: super warm white, 2700K, CRI>90+ Brightness: 35 lm/W or 350 lm/m, total: 1750 lm Beam angle: 120° Protection rating: IP67 LED type: COB Cutting length: 83.3 mm LED strip dimensions: 5000 × 14.5 × 6 mm Width/height of connector: 18 × 10 mm Operating temperature: -25°C to +105°C (221°F) Adhesive tape: yes, 3M on the back Please ensure that the LED strip does not exceed an operating temperature of 40°C, as otherwise its service life cannot be guaranteed. No warranty can be provided for overheated LED strips.
Synergy 21 LED Flex Strip NEON 360° Serie Die Neon 360° Strip Serie leuchtet homogen 360° ohne dunkle Stellen Der Strip kann frei gebogen werden, mit überragender Flexibilität und breiter Anwendung. Der Strip ist IP65, aus umweltfreundlichen Silikonmaterial, salz- und alkalibeständig, UV-beständig, flammhemmend. Länge: 5m Spannung: 24V Watt: 11W/m, 55W Lichtfarbe: gelb, 97nm Helligkeit: ambiente Beleuchtung Abstrahlwinkel: 360° Schutzklasse: IP65 LED Anzahl: 360/m, Maße: 5000*15 mm (L*Durchmesser) Arbeitstemperatur: -20°C bis +50°C dimmbar: ja Kürzbar: nein Klebeband: nein Energieeffizienzklasse: A kWh/1000h: 60,5 Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 50°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.
Synergy 21 LED Flex Strip NEON 360° Serie Die Neon 360° Strip Serie leuchtet homogen 360° ohne dunkle Stellen Der Strip kann frei gebogen werden, mit überragender Flexibilität und breiter Anwendung. Der Strip ist IP65, aus umweltfreundlichen Silikonmaterial, salz- und alkalibeständig, UV-beständig, flammhemmend. Länge: 5m Spannung: 24V Watt: 11W/m, 55W Lichtfarbe: warmweiss , 3000K, CRI>80 Helligkeit: 751lm/m, Gesamt: 3755lm Abstrahlwinkel: 360° Schutzklasse: IP65 LED Anzahl: 360/m, Maße: 5000*15 mm (L*Durchmesser) Arbeitstemperatur: -20°C bis +50°C dimmbar: ja Kürzbar: nein Klebeband: nein Energieeffizienzklasse: A kWh/1000h: 60,5 Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 50°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.
Synergy 21 LED Flex Strip NEON 360° Serie Die Neon 360° Strip Serie leuchtet homogen 360° ohne dunkle Stellen Der Strip kann frei gebogen werden, mit überragender Flexibilität und breiter Anwendung. Der Strip ist IP65, aus umweltfreundlichen Silikonmaterial, salz- und alkalibeständig, UV-beständig, flammhemmend. Länge: 5m Spannung: 24V Watt: 11W/m, 55W Lichtfarbe: kaltweiss, 6000K, CRI>80 Helligkeit: 792lm/m, Gesamt: 3960lm Abstrahlwinkel: 360° Schutzklasse: IP65 LED Anzahl: 360/m, Maße: 5000*15 mm (L*Durchmesser) Arbeitstemperatur: -20°C bis +50°C dimmabar: ja Kürzbar: nein Klebeband: nein Energieeffizienzklasse: A kWh/1000h: 60,5 Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 50°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.
Synergy 21 LED Flex Strip NEON 360° Serie Die Neon 360° Strip Serie leuchtet homogen 360° ohne dunkle Stellen Der Strip kann frei gebogen werden, mit überragender Flexibilität und breiter Anwendung. Der Strip ist IP65, aus umweltfreundlichen Silikonmaterial, salz- und alkalibeständig, UV-beständig, flammhemmend. Länge: 5m Spannung: 24V Watt: 11W/m, 55W Lichtfarbe: neutralweiss , 4000K, CRI>90 Helligkeit: 770lm/m, Gesamt: 3850lm Abstrahlwinkel: 360° Schutzklasse: IP65 LED Anzahl: 360/m, Maße: 5000*15 mm (L*Durchmesser) Arbeitstemperatur: -20°C bis +50°C dimmbar: ja Kürzbar: nein Klebeband: nein Energieeffizienzklasse: A kWh/1000h: 60,5 Achten sie darauf, dass der LED Strip die Arbeitstemperatur von 50°C nicht überschreitet, da sonst die Lebensdauer nicht gewährleistet werden kann. Auf überhitzte LED Strips kann keine Garantie gewährt werden.
Zubehör für RGB-WW Flex-Stripe 5050 mit 15mm Breite: Set mit 5 Endkappen und Kleber und Klips und Schrauben
Zubehör für RGB-W Flex-Stripe 5050 IP68 mit 15mm Breite: Set mit 5 Endkappen und Kleber und Klips und Schrauben
Synergy 21 LED Flex Strip Series COB FREECUT A copper strip is embedded on the reverse side to improve stability and heat dissipation. Voltage: 24V, Wattage: 10W/m, 50W total Light colour: neutral white, 4000K, CRI>90 Luminous efficacy: 110 lm/W or 1100 lm/m, total: 5500 lm Beam angle: 120° Protection class: IP20 Number of LEDs: 480 LEDs/m, total: 2400 LEDs LED type: COB Cutting dimensions: free-cut LED strip dimensions: 5000 × 10 × 2.5 mm Operating temperature: -25°C to +40°C Adhesive tape: yes, 3M on the back Please ensure that the LED strip does not exceed an operating temperature of 40°C, as otherwise its service life cannot be guaranteed. No warranty can be provided for overheated LED strips.
Synergy 21 LED Flex Strip series COB FREECUT For better stability and heat dissipation, a copper strip is embedded on the back. Voltage: 24V, Watt: 10W/m 50W total Light colour: super warm white, 2700K, CRI>90 Brightness: 90Lm/W or 900Lm/M total: 4500LM Beam angle: 120° Protection class: IP20 LED number: 480LEDs/m, total: 2400LEDs LED type: COB Cutting dimension: freecut LED strip dimensions: 5000*8*2.5mm Working temperature: -25°C to +40°C Adhesive tape: yes 3M on the back Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED Strips.
Synergy 21 LED Flex Strip series COB high power For better stability and heat dissipation, a copper strip is embedded on the back. Voltage: 24V, Watt: 15W/m 75W total Light colour: warm white, 3000K, CRI>90 Brightness: 891Lm/W or 1317Lm/M total: 6685LM Beam angle: 120° Protection class: IP20 LED number: 480LEDs/m, total: 2400LEDs LED type: COB Cutting dimension: 50mm LED strip dimensions: 5000*10*2.5mm Working temperature: -25°C to +40°C Adhesive tape: yes 3M on the back Make sure that the LED strip does not exceed the operating temperature of 40°C, otherwise the service life cannot be guaranteed. No guarantee can be given for overheated LED Strips.