MEANWELL Netzteil - 24V 40W IP67
€26.60
Available, delivery time: 1-2 Tage
LPF-40-24, IP67, SELV, MM, ENEC
Can CV and CC simultaneously
Input: 90-305VAC, 127~431VDC
Output: 1.67A, 14.4~24, 40.08W
Operating temperature: -40°C to +80°C
LxWxH 162.5*43*32mm
Please refer to the data sheet for exact technical details
The connection of electrical components and systems may only be carried out by
qualified specialists!
Article properties
| Ampere (CC): | 1,67 A |
|---|---|
| Betriebstemperatur: | -40 bis +80 Grad |
| Dimmbar: | Nein |
| Grösse: | 162,5*43*32 mm |
| Konstantstrom oder Konstantvolt: | CC + CV |
| Produktname: | Netzteil 24V |
| Schutzklasse: | IP67 |
| Volt: | 24 Volt |
| Watt: | 40 W |
Information on Energy efficiency
| Energy efficiency class | |
|---|---|
| KWh/1000h: | |
| Lumen: | |
| Watt: | |
| Lifetime: | h |
| Switch cycles: | |
| Optimal operating temperature: | °C |
GPSR
Handelsname
ALLNET GmbHHandelsmarke
Synergy 21Postanschrift
Maistr. 2, 82110 GermeringMögliche Risiken
WARNUNG: Eingang 230V AC – lebensgefaehrliche Netzspannung! Installation nur durch Elektrofachkraft. Vor Montage Stromversorgung trennen. Nicht oeffnen oder veraendern. Kurzschluss- und Brandgefahr bei falscher Verdrahtung.Fuer Aussen-/Feuchtraumbereich geeignet (IP65/IP67). Kabelein-fuehrungen fachgerecht abdichten. Ausreichende Belueftung sicherstellen. Ausgangsspannung und Laststrom der Verbraucher pruefen. Kinder fernhalten.
Entsorgung gemaess WEEE-Richtlinie – nicht im Hausmuell entsorgen. Defekte Netzteile sofort austauschen. Vor Reinigung Strom trennen. Betrieb nur gemaess angegebenem IP-Schutz. Ausser Reichweite von Kindern aufbewahren.
WEEE
WEEE Marke
Mean WellWEEE Reg. Nr.
DE13101093Geräteart
5 - KleingeräteB2C Gerät
250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter
Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0
Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS
Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm
Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm
IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm
IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm
5 pack of quick connectors 3 inputs and 3 outputs for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C
5 pack of quick connectors 2 inlets and 4 outlets for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C
Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.
Accessories
250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter
Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0
Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS
Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm
Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm
IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm
IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm
5 pack of quick connectors 3 inputs and 3 outputs for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C
5 pack of quick connectors 2 inlets and 4 outlets for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C
Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.